Русский
white line white line

Equipment for chemical and oil-refining industry

Self-power generators and power supply units

Turbine Expanders and generator expanders

Turbine Expanders and generator expanders

    Operating characteristics:
    • Capacity: up to 60 MCMPD
    • Power: from 100 to 50000 kWt
    • Inlet pressure: up to 150 atm
    • Inlet temperature: from -196 °С
    • Expander isoentropic efficiency coefficient: up to 90%

Energy units — based heat and power plants

    Energy units – based heat and power plants Operating characteristics:
    • Feed stock:
    • Power from 100 W to 2,8 MW
    • High efficiency coefficient 60 to 95%
    • Modular construction with automatic system

Industrial generator units>

    Industrial generator units
  • Cogenerators
    • Power 10 kW to 8 MW
    • AC 3 ph /50 Hz/ 380 V, 6 kW, 10 kW

  • Diesel generators
    • Power 2 kW to 3 MW
    • AC 3 ph /50 Hz/ 380 V, 6 kW, 10 kW

  • Associated gas generators
    • Power 10 kW 8 MW
    • AC 3 ph /50 Hz/ 380 V, 6 kW, 10 kW


Automatic fire-fighting systems

    Automatic fire-fighting systems
  • Gas fire-fighting systems
    • Operating medium
      • Argon balloons 200 bar
      • Carbonic acid
      • Freon's NAF S-125 and HFC-227ea (FM200)
  • Foam fire-fighting systems
    • Operating medium
      • Low expansion foam with water 3% and 6%
      • Middle and high expansion foam from 20:1 to 1000:1
  • Water fire-fighting systems
  • Fire alarm systems

Vapor recovery units of volatile hydrocarbons (VRU)

    Operating characteristics:
    • Flow rate: 10 m3/h ... 30 000 m3/h
    • Required power (average annual): 0,08 kW.h/m3 ... 0,15 kW.h/m3
    • Recovery range: 97 ... 99,9%
    • Allowable VRU constant overload: 150%
Vapor recovery units of volatile hydrocarbons (VRU)

The following products' vapor recovery is possible:

  • Light petrol
  • Methyl-tret-butyl-ether and ethanol mixtures
  • Diesel/petrol
  • Trichloroethylene
  • Naphta
  • Methylenechloride
  • Pentan
  • Acrylonitril
  • Crude oil vapour
  • Propyleneoxide
  • Benzol
  • Xylol
  • Liquified petroleum gas
  • Sterol and other volatile organic compounds and inorganic components

Tank Roofs

  • Tank Internal floating roofs (pontoons)
    Consist of: Tank Internal floating roofs (pontoons)
    • Pipe float
    • Supporting structure
    • Gas-impermeable coating
    • Additional coating from clad materials
    • External O-ring
    • Rim seals

  • Aluminum dome tank roofs
    Main Advantages:
      Aluminum dome tank roofs
    • Maintenance is not required
    • 95-98% loss reduce
    • Life of the structure
    • Small costs for installation
    • Easy assembly
    Dome roof advantages:
    • Long operating life
    • Built-up construction, easy installation and transportation
    • High corrosion resistance
    • Low cost maintenance
    • Particularly light construction

Automatic self-cleaning filters

  • Standard liquid mesh filters
    Technical data:
    • Construction types: Standard liquid mesh filters
      • Horizontal
      • Vertical
      • Cover designed with removable or bolted unit
      • Filtering element – perforated bowl
    • Flanged or welded connection
    • Material of construction
      • Carbon steels
      • Stainless steels SUS 304 or SUS 316 L.
      • Alloys
      • Color-coated steels
    • Filtering degree: 5 mm … 50 micron
    • Operating life: over 20 years

  • Automatic liquid filters
  • Automatic liquid filters
    Technical data:
    • Construction types:
      • Automatic duplex filtration
      • Automatic tabular filtration
    • Material of construction:
      • Carbon steels
      • Stainless steels SUS 304 or SUS 316 L.
      • Alloys
      • Color-coated steels
    • Filtering degree: max. 20 micron
    • Operating life: over 20 years

Industrial liquid and gas heaters

  • Electrical gas and liquid heaters with temperature PID-regulators Electrical gas and liquid heaters with temperature PID-regulators
    • Submersible process heaters
      • Pipe thread heater
      • Pipe flanged heater 2-24"
      • Electric heater for side installation
      • Cooling tower heater
      • Electric heater for bottom installation
      • Tank electric heater
    • Electrical gas and liquid heaters with temperature PID-regulators
    • Circulation electric heaters
    • Resistive pipe electric heater
    • Process electric heaters
      • Pipe
      • Ribbed pipe
      • Open

  • Oil and liquid heaters based on gas and oil products combustion
  • Oil and liquid heaters based on gas and oil products combustion
    • Convection type
    • Radiant wall type with a helical two- or three-way coil
    • Serpentine type
    • Enclosure type
    • Water bath type
    • Heated fuel tanks

    Technical data: Oil and liquid heaters based on gas and oil products combustion
    • Efficiency factor: up to 93%
    • Heater thermal power: from 5 up to 40 MWt
    • Oil productive capacity: up to 2000 m3/h
    • Operating life: up to 30 years

Thermal waste utilization systems (incinerators)

The system includes:

Thermal waste utilization systems (incinerators)
  • Solid waste loading system
    • Feed hopper with shake screen
    • Twin screw
    • Weight hopper
    • Belt conveyor
    • Furnace feed screw
  • Gas feed and distribution system for combustion
  • Rotary furnace with a burner
  • Thermal waste utilization systems (incinerators)
  • Secondary chamber (oxidizer)
  • Dust collector (cyclone)
  • Unloading system
    • Furnace conveyor
    • Cyclone conveyor
    • Discharge hopper
  • Cleaning system
  • Control system

Incinerators application:

  • solid industrial and domestic household wastes
  • liquid wastes
  • hazardous biological wastes
  • oil sludge wastes
  • petrochemical manufacture wastes

Closed flaring systems for gaseous waste combustion

  • Air supply flaring system
    Advantages: Air supply flaring system
    • Minimal environmental impact of the flare
    • Prolonged operating life of the flare tip
    • Low power intake
    • Cost savings
    • Maintenance cost reduce
    • Operation flexibility and steam consumption decrease
    • Safe system operation
    • Flexibility of technological characteristics

  • Steam supply flaring system
    Advantages: Steam supply flaring system
    • Zero-emission operation at high load
    • Prolonged operating life of the flare tip
    • Low noise level
    • Absence of internal burning
    • Flame jumps reduce
    • Low load operation available
    • Flame stability through out the operating range
    • Safe system operation
    • Flexibility of technological characteristics

Leak proof loading, unloading and transfer systems for oil products and other liquids

Leak proof loading, unloading and transfer systems for oil products and other liquids
  • Leak proof top loading stations
  • Marine loading arms
  • Bottom loading stations
  • Liquefied gas unloading and loading systems
  • Tank car loading systems
  • Chemicals loading systems
  • Single-point loading units

Oil-and-Gas Pipeline Cleaning Systems

Oil-and-Gas Pipeline Cleaning Systems
  • Pig receivers and launchers
  • Scrapers of various versions from 2" to 56"
  • Welding tools
  • Leak sealing plugs
  • Compression and compensation plugs
  • T-bends for spheres to pass

Gas Compressors of SUNDSTRAND Corporation (Sundyne) (France)

Single-Stage centrifugal compressor, LMC/BMC-331 (341)
  • Single-Stage centrifugal compressor, LMC/BMC-331 (341)
    • Capacity up to 1450 nm3/h
    • Operating pressure up to 100 bar
    • Rotor speed up to 33600 rpm
    • Motor power up to 298 (335) kW
    • Operating temperature: -130 … +260 °C
    • Vertical or horizontal

  • Single-Stage centrifugal compressor LMC/BMC-333 (343) Single-Stage centrifugal compressor LMC/BMC-333 (343)
    • Capacity up to 3570 nm3/h
    • Operating pressure up to 70 bar
    • Rotor speed up to 33600 rpm
    • Motor power up to 298 (335) kW
    • Operating power: -130 … +260 °C
    • Vertical or horizontal

  • Single-Stage centrifugal compressor LMC/BMC-337
  • Single-Stage centrifugal compressor LMC/BMC-337
    • Capacity up to 6030 nm3/h
    • Operating pressure up to 70 bar
    • Rotor speed up to 33600 rpm
    • Motor power up to 298 kW
    • Operating power: -130 … +260 °C
    • Vertical or horizontal
  • Multi-stage centrifugal compressor Pinnacle LF-2000 Multi-stage centrifugal compressor Pinnacle LF-2000
    • Capacity up to 17000 nm3/h
    • Operating pressure up to 350 bar
    • Rotor speed up to 42000 rpm
    • Motor power up to 2983 kW
    • Operating power: -130...+260°C
    • Horizontal

Steam turbines Shin Nippon Machinery (Japan)

Steam turbines Shin Nippon Machinery (Japan)

Operating data:

  • Steam pressure up to 67 bar
  • Temperature up to 540°C
  • Power output up to 50000 kW


Heat exchange and capacitive equipment

  • Shell-and-tube heat exchangers: Heat exchange and capacitive equipment
    • Tube-bundle
    • Floating roof
    • U-tube
    • Rifled-tube
  • Plate-type heat-exchangers
  • Air-cooled heat-exchangers
  • Capacitive equipment
    • Pressurized reservoirs with integral components
    • Heat exchange and capacitive equipment
    • Economizers
    • Electricdehydrator
    • Dehydration tanks
    • Molecular sieve absorber
    • Feed water reservoirs for electric power plants
    • Degasification units
    • Double shell vacuum reservoirs
  • Technical data:
    • Nominal diameter: max. 7 m
    • Temperature: -200...+650 °C
    • Pressure: max. 500 bar
    • Length: up to 65 m
    • Wall thickness: up to 130 mm
    • Weight: max. 250 tons

Test Benches for Pipe, Valve, Reservoir Valve and Critical Block Hydraulic Testing

Test Benches for Pipe, Valve, Reservoir Valve and Critical Block Hydraulic Testing

Technical data:

  • Operating medium — process water (additional recycling as option)
  • Operating pressure, max. 4500 bar
  • Connection dimensions: 25 … 1500 mm (NP)

Test benches application:

  • shutoff valve strength and leakage test
  • housing part pressurization test of heat exchange and capacitive equipment
  • pipeline strength and leakage test
  • safety relief valve setting and hydraulic tests of strength and leakage
  • christmas tree tests

Heavy Duty Polymeric Pipes and Fittings

Heavy Duty Polymeric Pipes and Fittings
  • Pipes
  • Fittings and nonstandard offsets
  • Pipe and reactor internal linings
  • Column back-up internal blocks
  • Manifolds and collectors

Technical ceramics

Technical ceramics
  • Catalyst supports
  • Adsorbents
  • Acid-resistant nozzles
  • Acid-resistant surfaces
  • Bricks and blocs
  • Various-shape ceramics for cutting and crushing

Web-site bug report ENCE GmbH, Switzerland / ENCE gmbH, Schweiz / ЭНЦЕ ГмбХ, Швейцария © ENCE GmbH