• English English
    • русский Русский

Customers

ZAO Crimea TITAN, Armyansk ОАО Odessa Portside Plant, Odessa
ZAO "Crimea TITAN", Armyansk ОАО "Odessa Portside Plant", Odessa
ОАО DneprAZOT, Denprodzerzhinsk ОАО Poltavsky GOK, Komsomolsk
ОАО "DneprAZOT", Denprodzerzhinsk ОАО "Poltavsky GOK", Komsomolsk
ОАО Stirol Concern, Gorlovka АО Ukrtatnafta, Kremenchug
ОАО Stirol Concern, Gorlovka АО Ukrtatnafta, Kremenchug

All Customers

Pump units and assemblies

Centrifugal pumps for chemically aggressive medium

  • Single-stage centrifugal pumps
    • Standard single-stage pumps standard single-stage pump
      • According to DIN EN 733
      • For chemically aggressive medium according to DIN EN 22858
      • With increased pressure according to API-610
        Characteristics:
        • Flow rate up to 1800 m3/hr
        • Head up to 220-250 m
        • Shrouded or open impeller

    • single-stage pump for viscous medium
    • Single-stage pumps for viscous medium with:
      • Open impeller, standard design
      • Open impeller with 3 channels
      • Shrouded impeller with 3 or 4 channels
        Characteristics:
        • Flow rate up to 850 m3/hr
        • Head up to 130 m


  • Multi-stage horizontal centrifugal pumps
    • Horizontal, standard design
    • multi-stage horizontal centrifugal pump
    • Horizontal self-priming
      Characteristics:
      • Flow rate up to 500 m3/hr
      • Head up to 320 m
      • Self-priming stage is possible
      • Design for low NPSH value

  • multi-stage vertical centrifugal pump
  • Multi-stage vertical centrifugal pumps
    • Standard type
    • Vertical-suspended type
    • Barrel type
      Characteristics:
      • Flow rate up to 4 to 1100 m3/hr
      • Head up to 320-400 m
      • Self-priming stage is possible
      • Design for low NPSH value

  • High pressure multi-stage centrifugal pumps
    • High capacity type
    • high pressure multi-stage centrifugal pump
    • Axial input
    • Shortened type
    • Low NPSH value
    • Vertical type
    • Vertical type according to API 610
      Characteristics:
        Flow rate, m3/hr Up to 800 Up to 300
        Head, m Up to 620 Up to 1200
      • Design with inducer is possible
      • Axial uploading

  • Self-priming centrifugal pumps for dirty medium
      Characteristics:
        self-priming centrifugal pump for dirty medium
      • Flow rate up to 100 m3/hr
      • Head up to 60 m
      • Solid coke size up to 23 mm
      • Shrouded or open impeller

  • pumps
  • Propeller pumps

  • Double-flow pumps
    • Horizontal type
    • Vertical type
      Characteristics:
      • Flow rate up to 6 000 m3/hr
      • Head up to 190 m

  • Centrifugal pumps with magnetic coupling
    • Standard single-stage pumps with magnetic coupling
      Characteristics:
      • Flow rate up to 1000 m3/hr
      • Head up to 100 m

    multi-stage horizontal and vertical pumps with magnetic coupling
    • Multi-stage horizontal and vertical pumps with magnetic coupling
      Characteristics:
      • Flow rate up to 300 m3/hr
      • Head up to 340 m

      multi-stage horizontal pump with leakproof shell
    • Multi-stage horizontal pumps with leakproof shell
      Characteristics:
      • Flow rate up to 35 m3/hr
      • Head up to 200 m

      self-priming centrifugal pump with magnetic coupling
    • Self-priming centrifugal pumps with magnetic coupling
      Characteristics:
      • Flow rate up to 100 m3/hr
      • Head up to 60 m


Teikoku-electric leakproof centrifugal pumps (Japan)

standard leakproof centrifugal pump, F type

WARMAN centrifugal slurry pumps

  • Horizontal centrifugal slurry pumps

    Slurry pump M, AH series
    • Slurry pump M, AH series
      Characteristics:
      • Flow rate from 4 to 5400 m3/hr
      • Headfrom 5 to 118 m

    • Slurry pump G series
    • Slurry pump G series
      Characteristics:
      • Flow rate from 36 to 5040 m3/hr
      • Head from 5 to 80 m


    • Slurry pump ZGB series
    • Slurry pump ZGB series
      Characteristics:
      • Flow rate from 50 to 1919 m3/hr
      • Head from 25 to 94 m


    • Slurry pump L series
    • Slurry pump L series
      Characteristics:
      • Flow rate from 3 to 13860 m3/hr
      • Head from 4 to 60 m

  • Vertical centrifugal slurry pumps

      Vertical slurry pump SP series
    • Vertical slurry pump SP series
      Characteristics:
      • Flow rate from 17 to 1267 m3/hr
      • Head from 4 to 40 m

  • Special centrifugal slurry pumps

      Slurry pump AF series
    • Slurry pump AF series
      Characteristics:
      • Flow rate up to 40 to 595 m3/hr
      • Head up to 20 m


Screw (auger-type) pumps for oil-and-gas and chemical industry (Italy)

  • Medium pressure screw pump
    Medium pressure screw pump Characteristics:
    • Flow rate from 0,6 to 320 m3/hr
    • Discharge pressure up to 30 bar
    • Suction pressure from «-» 0,5 to 10 bar
    • Kinematic viscosity from 10 to 1500 sSt
    • Operating temperature from 0 to 120 °C
    • Drive speed from 750 to 3600 rpm

    Application - for high viscosity and gas bubble liquids


  • Low pressure screw pump for lubrication systems
    Low pressure screw pump for lubrication systems Characteristics:
    • Flow rate from 24 to 320 m3/hr
    • Discharge pressure up to 16 bar
    • Suction pressure from «-» 0,5 to 10 bar
    • Kinematic viscosity from 10 to 400 sSt
    • Operating temperature from 0 to 120 °C
    • Drive speed from 1500 to 1800 rpm

  • Medium pressure screw pump for lubrication systems
    Medium pressure screw pump for lubrication systems Characteristics:
    • Flow rate from 0,6 to 180 m3/hr
    • Discharge pressure up to 30 bar
    • Suction pressure from «-» 0,5 to 10 bar
    • Kinematic viscosity from 10 to 400 sSt
    • Operating temperature from 0 to 120 °C
    • Drive speed from 750 to 3600 rpm

  • Low flow rate and low pressure screw pump for lubrication systems
    Low flow rate and low pressure screw pump for lubrication systems Characteristics:
    • Flow rate 10 m3/hr
    • Discharge pressure up to 16 bar
    • Suction pressure from «-» 0,7 to 10 bar
    • Kinematic viscosity from 10 to 400 sSt
    • Operating temperature from 0 to 120 °C
    • Drive speed from 1000 to 3600 rpm

  • Screw pump for low viscosity and non-lubrication systems
  • Screw pump for low viscosity and non-lubrication systems
    Characteristics:
    • Flow rate from 0,85 to 6 m3/hr
    • Discharge pressure up to 100 bar
    • Suction pressure from 0,5 to 10 bar
    • Kinematic viscosity from 1 to 10 sSt
    • Operating temperature from 0 to 100 °C
    • Drive speed from 2900 to 3500 rpm

  • Double screw rotor pump

    • MODEL 1, 2, 3
      Characteristics:
      • Discharge pressure up to 16 bar
      • Suction pressure up to 6 bar
      • Kinematic viscosity up to 1500-2500 sSt
      • Operating temperature up to 100-200 °C
      • Drive speed up to 3500 rpm

      Application - good lubricating capacity liquids (Model 1), water, chemical and gas-and-oil products, low viscosity non-lubricating capacity liquids


    • MODEl 4
    • MODEl 4
      Characteristics:
      • Discharge pressure up to 40 bar
      • Suction pressure up to 10 bar
      • Kinematic viscosity up to 15000 sSt
      • Operating temperature up to 300 °C
      • Drive speed up to 3500 rpm

      Application – hazardous liquids, chemical and gas and oil products, medium or high viscosity non-lubricating capacity liquids


Rotor vane pump for heavy high viscosity products

    Characteristics:
      Rotor vane pump for heavy high viscosity products
    • Flow rate up to 265 m3/hr
    • Discharge pressure up to 14 bar (50 barupon request)
    • Kinematic viscosity from 2 to 75000 sSt
    • Operating temperature from «-» 30 to +260 °C

    Application
    • lubricating oils and their additives
    • oil products (bitumen, tar oil, asphalt)
    • consistent lubricates
    • polymers and high-molecular alcohol
    • resins, laquers, glues

HAUKE dosing (metering) plunger and diaphragm pumps (Austria)

  • Dosing pump PIM E type
      Plunger dosing pump PIM E and EM
    • Plunger dosing pump PIM E and EM
      Characteristics:
      • Flow rate from 0 to 280 l/hr
      • Discharge pressure up to 500 bar

    • Diaphragm dosing pump PIM E-ZM
    • Diaphragm dosing pump PIM E-ZM
      Characteristics:
      • Flow rate from 0 to 180 l/hr
      • Discharge pressure up to 18 bar

  • Dosing pump PIM L type Dosing pump PIM L type
    • Plunger dosing pump PIM L
    • Diaphragm dosing pump PIM LM
      Characteristics:
      • Flow rate up to 0 to 800 l/hr
      • Discharge pressure up to 644 bar

  • Dosing pump PIM P type
  • Dosing pump PIM P type
    • Plunger dosing pump
    • Diaphragm dosing pump
      Characteristics:
      • Flow rate from 0 to 5200 l/hr
      • Discharge pressure up to 1674 bar

  • Dosing pump PIM M type Dosing pump PIM M type
    • Plunger dosing pump
    • Diaphragm dosing pump
      Characteristics:
      • Flow rate from 0 to 8600 l/hr
      • Discharge pressure to 2918 bar

  • Three-head plunger dosing pump PIM G type Three-head plunger dosing pump PIM G type
      Characteristics:
      • Flow rate from 0 to 20000 l/hr
      • Discharge pressure up to 2918 bar

  • Two-head plunger dosing pump PIM S type Two-head plunger dosing pump PIM S type
      Characteristics:
      • Flow rate from 0 to 70000 l/hr
      • Discharge pressure up to 2918 bar


Wepuko hydraulik GmbH plunger (piston) pumps (Germany)

  • Triplex plunger pump DP type Triplex plunger pump DP type
      Characteristics:
      • Flow rate up to 180 m3/hr
      • Discharge pressure up to 1000 bar

  • Radial plunger pump RX type Radial plunger pump RX type
      Characteristics:
      • Flow rate up to 60 m3/hr
      • Discharge pressure up to 450 bar

  • Constant flow plunger pump RF type Constant flow plunger pump RF type
      Characteristics:
      • Flow rate up to 72 m3/hr
      • Discharge pressure up to 1000 bar

  • Variable flow rate plunger pump RKP type Variable flow rate plunger pump RKP type
      Characteristics:
      • Flow rate up to 23 m3/hr
      • Discharge pressure up to 420 bar


WOMA GmbH plunger pumps and high pressure water-jet units (Germany)

WOMA GmbH plunger pumps and high pressure water-jet units (Germany)
    Characteristics:
    • Water flow rate up to 100 m3/hr
    • Discharge pressure up to 3000 bar
    • Electric power up to 780 kW
WOMA GmbH plunger pumps and high pressure water-jet units (Germany) WOMA GmbH plunger pumps and high pressure water-jet units (Germany) WOMA GmbH plunger pumps and high pressure water-jet units (Germany)

Web-site bug report ENCE GmbH, Switzerland / ENCE gmbH, Schweiz / ЭНЦЕ ГмбХ, Швейцария © ENCE GmbH